We recently had a TelMex PRI Installed (VOIP PRI Emulation) and has been a contact battle with them.
The issue is that I can receive inbound calls now, but outbound is not working, users get a busy siganl
The Route Pattern 2 is set to FRL0 for testing.
Trace:
dial 97xxxxxx
term trunk-grou 14 cid 0x2c4
dial 97xxxxxx
route-Pattern 2 preference 1 CID 0x2c4
seize Trunk-Group 14 Member 10 cid 0x2c4
Setup Digits 7xxxxxx
Calling Number and Name No-CpNumber No-Cpname
Proceed Trunk-Group member 10 cid 0x2c4
idle station 215 cid 0x2c4
ARS
7xxxxxx 7 7 Rt2 Locl
Rt 2
Trunk 14 , FRL 0
Am I missing something? I don't see the missing station part of it.
Any help would be great!
The issue is that I can receive inbound calls now, but outbound is not working, users get a busy siganl
The Route Pattern 2 is set to FRL0 for testing.
Trace:
dial 97xxxxxx
term trunk-grou 14 cid 0x2c4
dial 97xxxxxx
route-Pattern 2 preference 1 CID 0x2c4
seize Trunk-Group 14 Member 10 cid 0x2c4
Setup Digits 7xxxxxx
Calling Number and Name No-CpNumber No-Cpname
Proceed Trunk-Group member 10 cid 0x2c4
idle station 215 cid 0x2c4
ARS
7xxxxxx 7 7 Rt2 Locl
Rt 2
Trunk 14 , FRL 0
Am I missing something? I don't see the missing station part of it.
Any help would be great!