BigPhoneDaddy
IS-IT--Management
what is the proper setup/settings for Procomm to access an Octel 250 and 350?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Octel acccess via Procomm
- Thread starter BigPhoneDaddy
- Start date
- Status
- Thread starter
- #3
BigPhoneDaddy
IS-IT--Management
I'm not getting any type of response. What else should I look for?
- Thread starter
- #5
BigPhoneDaddy
IS-IT--Management
I am connecting and staying connected in the modem. I also have ASA, would this be easier to setup access versus Procomm?
It is not Procomm it is the modem. What type of modem do you have connected to the Octel ?
Have you set it up the init string in the modem?
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Have you set it up the init string in the modem?
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #7
BigPhoneDaddy
IS-IT--Management
Not the modem, my cinterpart can get in with no issues. Only thing different is that his has scripts that run.
bhanson184
Technical User
You can use ASA. On the connection I use the following for setup:
Baud Rate - 9600
Data Bite - 7
Parity - even
Stop Bit - 1
Flow Control - Hardware
Baud Rate - 9600
Data Bite - 7
Parity - even
Stop Bit - 1
Flow Control - Hardware
what is a cinterpart
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #10
- Status
Similar threads
- Locked
- Question