Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Octel 350 AMIS / Cisco Unity

Status
Not open for further replies.

YYCDave

IS-IT--Management
Feb 18, 2005
8
CA
Has anyone implemented AMIS on Octel to communicate with Cisco Unity 4.X? If so can you share your experiences on how it went?
 
We have done alot of that from the Octel side. You just setup a node and tell it is an amis node so you don't have to dial 24 digits to send a message. Not sure about how it works on the Cisco side.

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Helped with a Cisco Unity to Avaya Interchange. It's working. A bit buggy though. The Unity peice will occasionally forget to answer the AMIS transfer. I was the Interchange support side. I can answer all of that side. The Cisco side was done by Cisco.

Bob K.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top