Octel 250 Aria failure

[tntmart]

Power failure over the weekend. When systen tries to reboot it gets to
"SCSIDisk Drive diagnostic.....................[4D] Started
*4D/1* *** Got Check condition while doing the check condition cmd the request 2000d to target I.D 1
SCSI Disk drive diagnostic.....................{4D] Failed"

continues to reboot.

Is this saying my Disk one is defective. I assume the first (system) disk is 0, ans the second disk is one ??

Can someone help give me a direction to start

 

[KenMeans]

Can you post the whole boot screen. It looks like you have a bad drive but it may be something else.

Also try turning the system power off and when it get to the dram walking do a cntrl c and then a b at the boot menu

If not call me

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[tntmart]

Yes it was a bad drive...used the cntrl c and was able to bring the system up. Thanks for the help.