object reference not set to an instance of an object

[mytaurus2000]

I recently had to delete a reference and add it back to my project. Before this the project ran perfectly, but now the collapsible pain will not load on one form and on the other it won't compile saying that my object reference is not set.

Any ideas as to how to fix this and what exactly caused this problem?

 

[Qamgine]

Perhaps if you provide the code where the error is being raised, we might be able to see what is wrong.

 

[earthandfire]

Qamgine, you pipped me to the post!!

 

[mytaurus2000]

Sorry, I've been debugging for 5.5 hours a little brain drained.

Public Sub New(ByVal tmpDS As RAMs)
MyBase.New()

'This call is required by the Windows Form Designer.
InitializeComponent()

'Add any initialization after the InitializeComponent() call
RaMs1.Merge(tmpDS)

clsRAMType = New RAMType
'clsRAMParticipants = New RAMPartcipants
clsRAMPurpose = New RAMPurpose
'clsRAMEnrolment = New RAMEnrollment
clsRAMPIR = New RAMPIRInd
clsRAMBackground = New RAMBackground
clsRAMPRISM = New RAMPrism
clsRAMRisks = New RAMOtherRiskFactors
clsRAMResults = New RAMTAResults
'clsRAMStrengths = New RAMStrength
'clsRAMChallenges = New RAMChallenge
'clsRAMSustain = New RAMSustain
'clsRAMTANeeds = New RAMAddTANeed
'clsRAMNextMeet = New RAMNextMeeting

CollapsePanel1.Add(clsRAMType)
'CollapsePanel1.Add(clsRAMParticipants)
CollapsePanel1.Add(clsRAMPurpose)
CollapsePanel1.Add(clsRAMBackground)
'CollapsePanel1.Add(clsRAMEnrolment)
CollapsePanel1.Add(clsRAMPIR)
CollapsePanel1.Add(clsRAMPRISM)
CollapsePanel1.Add(clsRAMRisks)
CollapsePanel1.Add(clsRAMResults)
'CollapsePanel1.Add(clsRAMStrengths)
'CollapsePanel1.Add(clsRAMChallenges)
'CollapsePanel1.Add(clsRAMSustain)
'CollapsePanel1.Add(clsRAMTANeeds)
'CollapsePanel1.Add(clsRAMNextMeet)

AddHandler clsRAMBackground.GranteeBackground, AddressOf GrantBG
AddHandler clsRAMRisks.PreviousRisks, AddressOf OtherRisks

 

[mytaurus2000]

Public Sub New(ByVal tmpDS As RAMs)
        MyBase.New()

        'This call is required by the Windows Form Designer.
        InitializeComponent()

        'Add any initialization after the InitializeComponent() call
        RaMs1.Merge(tmpDS)

        clsRAMType = New RAMType
        'clsRAMParticipants = New RAMPartcipants
        clsRAMPurpose = New RAMPurpose
        'clsRAMEnrolment = New RAMEnrollment
        clsRAMPIR = New RAMPIRInd
        clsRAMBackground = New RAMBackground
        clsRAMPRISM = New RAMPrism
        clsRAMRisks = New RAMOtherRiskFactors
        clsRAMResults = New RAMTAResults
        'clsRAMStrengths = New RAMStrength
        'clsRAMChallenges = New RAMChallenge
        'clsRAMSustain = New RAMSustain
        'clsRAMTANeeds = New RAMAddTANeed
        'clsRAMNextMeet = New RAMNextMeeting

        CollapsePanel1.Add(clsRAMType)
        'CollapsePanel1.Add(clsRAMParticipants)
        CollapsePanel1.Add(clsRAMPurpose)
        CollapsePanel1.Add(clsRAMBackground)
        'CollapsePanel1.Add(clsRAMEnrolment)
        CollapsePanel1.Add(clsRAMPIR)
        CollapsePanel1.Add(clsRAMPRISM)
        CollapsePanel1.Add(clsRAMRisks)
        CollapsePanel1.Add(clsRAMResults)
        'CollapsePanel1.Add(clsRAMStrengths)
        'CollapsePanel1.Add(clsRAMChallenges)
        'CollapsePanel1.Add(clsRAMSustain)
        'CollapsePanel1.Add(clsRAMTANeeds)
        'CollapsePanel1.Add(clsRAMNextMeet)

        AddHandler clsRAMBackground.GranteeBackground, AddressOf GrantBG
        AddHandler clsRAMRisks.PreviousRisks, AddressOf OtherRisks

 

[Qamgine]

Try pasting all of your code at

http://www.nomorepasting.com

and then just link to it from here.

Or just put the code that you are having a problem with in a code block.