Oaisys and SIP Trunks (using CTI)

[caknfd]

We have a Vmcd and Windstream SIP service coming in on MPLS and going directly to the Vmcd (no MBG) it is connecting OK and calls start to record then stop. We have the NIC in the Oaisys mirrored to the Vmcd and I think whats occuring is once the call is set up it is not going through the Vmcd any more so the Oaisys can't record it and it stops. Maybe the Oaisys should be mirrored to the Windstream router?
Anyone connected an Oaisys in this fashion Oaisys and Vmcd are both on the same VM host.

Any thoughts?

Craig

 

[sarond]

Correct, normally the call will route direct to the handset.
You should really think about getting MBG with SRC (Secure Recording Connector)

As you said you could try mirroring the router interface, it should work.