I am trying to run Caldera'a nwclient for linux on a Open Linux 2.2 system. I am able to log into our Novell 3.12 server but cannot access any of the volumes. nwwhoami confirms a connection and I have TCP/IP services from the Bootp server. Have I missed a configuration file? Any help would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
nwclient problem 1
- Thread starter Mick
- Start date
-
1
- #2
This is a problem that Caldera is working on. Check out the following FAQ on their support page:<br>
<br>
<br>
You can get the lastest nwclient 4.2.1-1 from:<br>
<br>
ftp.calderasystems.com/pub/OpenLinux/patches/earlyaccess/nwclient-4.2.1-1.i386.rpm<br>
<br>
You need to do the following to install it:<br>
<br>
INSTALLATION: If you already have the nwclient package installed, first remove it from your OpenLinux 2.2 system by entering the following command:<br>
<br>
rpm -e nwclient<br>
<br>
You may then download the file nwclient-4.2.1-1.i386.rpm to your local hard disk. Install it as user "root", using the following command:<br>
<br>
rpm -i nwclient-4.2.1-1.i386.rpm<br>
<br>
Upon restart, the NetWare Client will automatically start up. For further documentation on the utilities included in this package, view the "man pages" for all programs beginning with "nw" in the /usr/bin/ directory.<br>
<br>
Hope this helps,<br>
Greg
<br>
<br>
You can get the lastest nwclient 4.2.1-1 from:<br>
<br>
ftp.calderasystems.com/pub/OpenLinux/patches/earlyaccess/nwclient-4.2.1-1.i386.rpm<br>
<br>
You need to do the following to install it:<br>
<br>
INSTALLATION: If you already have the nwclient package installed, first remove it from your OpenLinux 2.2 system by entering the following command:<br>
<br>
rpm -e nwclient<br>
<br>
You may then download the file nwclient-4.2.1-1.i386.rpm to your local hard disk. Install it as user "root", using the following command:<br>
<br>
rpm -i nwclient-4.2.1-1.i386.rpm<br>
<br>
Upon restart, the NetWare Client will automatically start up. For further documentation on the utilities included in this package, view the "man pages" for all programs beginning with "nw" in the /usr/bin/ directory.<br>
<br>
Hope this helps,<br>
Greg
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question