Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Number Translation

Status
Not open for further replies.

serap

Technical User
Dec 9, 2003
1
US
I am trying to set up 5 digit dialing between two different locations (separate area codes)
Both PBX's are Nortel Meridian 1 (Option 61C/and a 81C)
I have never done this, could really use some help


thank you,
Serap
 
You need to provide more information
what are the numbering plans for both switches.
what is the link, ie E1/T1/VNS ??
 
Ooh..ooh, i have done this for 4 PBX's, in one weekend!!!!

There are some items you will need to consider.

One. - Are the extensions between the two PBX's unique? or are there same extensions on both locations?

If there are, resolve this first. If not then you should b e good to go.

Two. - Are you using MAT/OTM/ or the Terminal to make your changes. MAT will slow down with messages appearing on the terminal, so this could slow you down. We manually programmed the extensions.

Three - Are you using a TIE line between the locations, or are you just going to add on teh 1 -XXX - part of the phone number.

Answer these first. email me at janaya1@satx.rr.com if you want to talk about it.

John

You just need to make sure
 

selam

bana bir telefon açin yardimci olmaya çalisayim
0 212 310 13 13 süreyya ayçe
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top