Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Number of PRI Cards in MICS
- Thread starter AlaaNajem
- Start date
You can install 2 digital trunk cards (2 PRIs) in the core unit.
Brian Cox
Brian Cox
SupportDude
Technical User
You can actually install a total of (3) DTI cards on a MICS.
Requirements:
MICS 6.0 or greater and one of the DTI cards must occupy an entire Trunk Module that is connected to expansion port 7 or 8. The newer DTI cards must be used for the off-core DTI.
The DTI's can be programmed as PRI or T1.
A PRI enabler keycode is required to program as PRI.
You only need purchase one keycode to enable PRI on all the DTI cards
HTH!
SD
Requirements:
MICS 6.0 or greater and one of the DTI cards must occupy an entire Trunk Module that is connected to expansion port 7 or 8. The newer DTI cards must be used for the off-core DTI.
The DTI's can be programmed as PRI or T1.
A PRI enabler keycode is required to program as PRI.
You only need purchase one keycode to enable PRI on all the DTI cards
HTH!
SD
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question