Number Conversion

[JONIES]

The following are my RODDP and NUTRP:


<RODDPEST=90802&90808&90807&90803&90805&90806&90703;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
90802 2 16051100000002500060000100 0 1 0
90808 2 16051100000002500060000100 0 1 0
90807 2 16051100000002500060000000 0 1 0
90803 2 16051100000002500060000100 0 1 0
90805 2 16051100000002500060000000 0 1 0
90806 2 16051100000002500060000100 0 1 0
90703 2 16051100000002500060000100 0 1 0


<NUTRP;
NUMBER CONVERSION DATA
ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC
3 1 10 2 90703 0803000 0 0
3 1 10 2 90803 0803000 0 0
5 1 10 2 90805 0805000 0 0
3 1 10 2 90806 0803000 0 0
5 1 10 2 90807 0805000 0 0
3 1 10 2 90802 0802000 0 0
3 1 10 2 90808 0802000 0 0

The problem is that I want to achieve the conversions below from my extensions to 3 different public networks. The extension passes through same route (2), to a transit PBX. Then from the transit PBX through different routes to the public:

1. All calls from extensions to 0803, 0806 and 0703 must have 0803000 as PREFIX
2. All calls from extensions to 0805 and 0807 must have 0805000 as PREFIX
3. All calls from extensions to 0802 and 0808 must have 0802000 as PREFIX

1 and 2 are working but 3 picks the prefix specified for 1. How do I correct this or achieve the above conversion on the originating PBX?

 

[mundus]

If you look at dest 90807 and 90805 then the d24 in ADC = 0, so how do calls "2" gets the number conversion ?

 

[JONIES]

Mundus,

Thanks. Do you mean that d24 in ADC for dest 90807 and 90805 should be 1? I have tried this but the extension isn't converted. What change(s) do I need to make.