Is the method described in thread: still valid?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NUI2 EIC code erase.
- Thread starter djudjuman
- Start date
whosrdaddy
Vendor
write & read procedures are still the same. To erase eic code, you must downgrade firmware.
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Thread starter
- #3
whosrdaddy
Vendor
ask Aastra, or your local provider. I don't have that version anymore.
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
aastratech
Technical User
is this NIU2 or NIU we are talking about???
- Thread starter
- #6
aastratech
Technical User
if you have r7A > you cannot downgrade to 6A...is there a different procedure to downgrade the NIU2??
subzerocool
MIS
Daddy, is it going to work? I heard the procedure might not work for the NIU2.
TraianosTraianos
Technical User
So if this procedure is not valid for NIU2 can someone advise what the procedure is for NIU2?
Thanks
Thanks
whosrdaddy
Vendor
like it has always been, send the board to Aastra and pay $$$ to clear EIC code. It's a matter of licensing politics...
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
TraianosTraianos
Technical User
That's great when you can send it to Aastra and they can do it for you, but when your in AUS and Telstra monopolise the industry and are the only one's you can go through and they won't repair it and want to sell you a new one for $$$$$ what do you do.
And by the way if it is a matter of licensing politics then how come every man and his dog puts the NIU erasure procedure up on this site! Also if anyone (vendors) really cared about it that much then this site would be 90% shut down as I'm sure they would prefer people went on correct training courses instead of getting backdoor and programming guides from here.
And by the way if it is a matter of licensing politics then how come every man and his dog puts the NIU erasure procedure up on this site! Also if anyone (vendors) really cared about it that much then this site would be 90% shut down as I'm sure they would prefer people went on correct training courses instead of getting backdoor and programming guides from here.
whosrdaddy
Vendor
NIU erasure was possible in early NIU firmwares and this was leaked on the site. btw, this site is monitored by Aastra people...
Send an email to Aastra directly and ask them how to proceed, you shouldn't buy a new board for license erasure.
or contact a good service provider, they can arrangr this for you...
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
Send an email to Aastra directly and ask them how to proceed, you shouldn't buy a new board for license erasure.
or contact a good service provider, they can arrangr this for you...
/Daddy
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Status
Similar threads
