when trying to start Openview I get the message that the trapmanager cannot be started maybe "SnmtNoTraps=no" in Ovwin.ini. the system is running NT worstation 4.0(sp4) and I have tried setting it to NO,no,YES,yes (rebooting between each) to no avail. Any one got any Ideas I need to get it working pretty urgently.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NT workstation snmptrap service fails with message snmpnotraps=no ?
- Thread starter stevefox
- Start date
- Thread starter
- #4
in reply to oneworld<br>
<br>
the full message is " Unable to start Trap Monitoring. Could not init OpenView SNMP: maybe 'SMNPNoTraps=no' in OVWIN.INI." <br>
<br>
this is presented in the error box when HP OpenView is started with no further error message or entry (that I can find in error logs) MSKnowledgebase only contains an entry saying that the default is no which means traps are enabled.<br>
<br>
thanks for responses so far<br>
<br>
stevefox
<br>
the full message is " Unable to start Trap Monitoring. Could not init OpenView SNMP: maybe 'SMNPNoTraps=no' in OVWIN.INI." <br>
<br>
this is presented in the error box when HP OpenView is started with no further error message or entry (that I can find in error logs) MSKnowledgebase only contains an entry saying that the default is no which means traps are enabled.<br>
<br>
thanks for responses so far<br>
<br>
stevefox
- Status
Similar threads
- Locked
- Question
- Locked
- Question