NT 4.0 SERVER SERVICE WON'T START

[bigartl]

NT 4.0 TERMINAL SERVER<br>
<br>
The SERVER SERVICE will not start on reboot or when attempted manual start of service. <br>
<br>
Any suggestions.

 

[SRG]

Check the event log. copy the test from there to this posting then I might be able to tell you.

 

[bigartl]

Server in classified spaces not accessable from here. Thanks for the effort.

 

[Natraj]

Check your lan card. In a similar situation i found that my NIC was the faulty and server service was not starting b'coz of that.<br>
Natraj

 

[PaulB]

I had that and reapplied SP3 which solved it. Apparently the network card was installed after the initial SP3 application.

 

[seabhreach]

What is the message in the Event Log? Most variations of this message can be solved by reapplying the SP.

 

[ScoobyDoo]

Start with the Event Log, anything their???<br>
Then Make sure nothing was recently changes in your configuration, hardware, etc...<br>
Then, That should tell you....<br>
Also, I am with a couple others, It sounds like a NIC card, or driver....<br>