NT 4.0 Multi-homing

[rholloway]

I have installed the two nic cards and both are working fine. I know this is basic but i am have trouble with routing between the two networks. Can someone help me in writing a static routing table for the server. I have tried several things and i am making a mistake somewhere since neither network can see each other.

Thank you in advance
rholloway

 

[BradSQLGuy]

Sounds like you need to enable IP forwarding. You shouldn't need to assign a routing table depending on how you have it set up. Statically just assign your router as your gateway or DHCP should take care of that if you have that service configured. The way you enable IP forwarding is go to your TCP/IP propertiesand there is a checkbox there. -Brad :-D
A+, MCSE NT4, MCDBA SQL7

When you're having a bad day just remember it could be worse.....couldn't it?