Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ns500

Status
Not open for further replies.
inlsp05

inlsp05

Technical User
May 18, 2015
452
IR
Hi my ns500 couldnt start show orange and then red led how can flash that? I hearit acn be with 4 file and sdram in main

PG4E
 
Sort by date Sort by votes
Have you completed the initialization procedure?

Also note: when a DSP card is installed and DHCP server is not connected, the DSP can't obtain an IP-address, ans STATUS indicator turns red (see Installation Manual, paragraph "4.13 Starting the PBX").

------------
Telephone communication like an air: you do not notice it until you spoil it.
 
Upvote 0 Downvote
yes compelete initial setup and there no any dsp card just use default co&ext...

PG4E
 
Upvote 0 Downvote
Well, describe to us (step by step) what are you doing and what happens after that.
Did your PBX ever work?

------------
Telephone communication like an air: you do not notice it until you spoil it.
 
Upvote 0 Downvote
this is not keeping orange just about 2 seconds orange and red led is on... flash red led every 2 seconds link not coming up system dosnt start.

PG4E
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ctamir
  • Question
ns500 walking ext
Replies
1
Views
222
EMJP
EMJP
ingy500
  • Locked
  • Question
ns500 to ns500
Replies
2
Views
310
BrixStand
BrixStand
ctamir
  • Locked
  • Question
ns500 attack 1
Replies
7
Views
1K
Ired
Ired
Eng.M
  • Question
Kx-ns500 Recording tone
Replies
2
Views
329
Ired
Ired
ingy500
  • Locked
  • Question
ns500 /ns1000
Replies
3
Views
290
ingy500
ingy500

Part and Inventory Search

Sponsor

Back
Top