Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Novell client 3.0
- Thread starter jdavis37
- Start date
shebmeister
MIS
right click Network Neighborhood
properties
Configuration tab
Select Novell NetWare Client
Properties
On Novell NetWare Client Properties
Select "Location Profiles" Tab
Select (hightlight the word) "Default"
then click on Properties
This takes you to the -->
--> "Location Profile Properties: Default" Tab
Click on "Properties" again
Any changes you make on the following Tabs will be
kept on Reboot
"OK" da hoe way back
Stay tuned next week and I'll give you a map to Solomons' Mines
sheb
properties
Configuration tab
Select Novell NetWare Client
Properties
On Novell NetWare Client Properties
Select "Location Profiles" Tab
Select (hightlight the word) "Default"
then click on Properties
This takes you to the -->
--> "Location Profile Properties: Default" Tab
Click on "Properties" again
Any changes you make on the following Tabs will be
kept on Reboot
"OK" da hoe way back
Stay tuned next week and I'll give you a map to Solomons' Mines
sheb
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question