Nortell how to know if i have an available analog extention

[ferfevisa]

I need add a new analog extention, i dont know what program should use, and i dont know if a have an avalaible analog extention.

Thanks in advance

 

[bhassell2000]

are you asking if you have an available TN port or an available extension number?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[GHTROUT]

Are you able to log into the system? If Yes, then go to LD 20 to find unused TNs.

[tt]
>LD 20

PT0000
REQ: LUVU
TYPE: 500
TN
CDEN
TYPE 500 TN 004 0 04 03 4D
TYPE 500 TN 004 0 04 10 4D
TYPE 500 TN 004 0 14 00 4D
[/tt]

If you want to look for unused telephone DNs, do this:

[tt]
>LD 20

PT0000

REQ: PRT
TYPE: LUDN
CUST 0
DN

CUSTOMER 00 - UNUSED DNS:
1008 1009 1011 1018 1019 1020 1063 1064 1065 1066
1067 1068 1069 107 108 109 1100 1102 1103 1106
1109 1110 1111 1113 1114 1115 1119 1120 1131 1141
1149 115 116 117 118 119 1207 1208 1209 121
122 123 etc. etc
[/tt]



--
Nortel Resources at GHTROUT.com World Famous!
--

 

[ferfevisa]

Thanks bhassel & ghtrout.
i use ld 20
req luvu
type 500
tn enter
apear an error SCH0821
i look and this error means that i heve not a extention available, it this correct ?? this is the real meaning ?

thanks a lot !!!

 

[Dphone]

Try LUU instead of LUVU

 

[bhassell2000]

go in to LD 22 and at req type SLT and hit enter and see iof you have any analog TN licenses available. It sould like you either dont have a hardware port to assign or you are out of TN licenses.

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[ferfevisa]

ok bhassell i ran program ld22 req slt and send me this info.

System type is - PBX 11C
Nortel PBX 11C


ANALOGUE TELEPHONES 48 LEFT 0 USED 48
CLASS TELEPHONES 0 LEFT 0 USED 0
DIGITAL TELEPHONES 72 LEFT 0 USED 72
it meaning that i have not anyone available extention ?
it is right ?

 

[GHTROUT]

That shows us you have zero analog and zero digital TNs licenses left.

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[bhassell2000]

so you will need to upgrade and buy more TNs or find one that is not being used and reclaim it

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[mlgmartin]

Try to look for a TNs that were programmed but no telephones connected into it. For analog, there's no other way but to physically inspect your panel. For digital, you can use a command to disable all TNs without phones connected.

"It is an equal failing to trust everybody, and to trust nobody.

 

[ferfevisa]

Thanks all of you !! i find ( and learning ) how to know if i had an available analog extention. ( we have no available ) so i use another one wich was not used. i think we need to buy more TNS.

Thanks again to all of you !!! and sorry for mi english i am also learning your lenguage.