Nortel - TTY 03 SCH MTC BUG - Option 11C Software 7.5 - ERROR ISSUE

[babytech2009]

Hello All,

I have a option 11C version 7.5, I am not able to access through the web, so I use command line and I have been trying for a few days with the main account and my personal(I created).

I type

Logi
admin
xxxxx

The screen says this everytime before and after I try typing the login credentials.

TTY 03 SCH MTC BUG 10:44
OVL111 IDLE 0


I am also not at the site so I dont have access to the equipment physically.


Thank you in advance!
As always the guidenance is appreciated.

 

[Firebird Scrambler]

Has the CS1000e been registered correctly?. Has the accounts been dumped onto the Call Server?. Are you sure that it's a 7.5 release?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[babytech2009]

Not sure it does a nightly routine that is how it was setup for each site. in LD 143. Yes i am sure we had all the Element Managers upgraded to 7.5.

 

[babytech2009]

IP Address: xx.xx.xx.xx
Type: Avaya Communication Server 1000E CPPM
Version: 4021
Release: 750 Q +

 

[janaya]

try logging in with admin1/admin2 logins. Like david stated, it may not be registered to the security domain.

 

[curtismo]

Make sure you have multiuser turned on on that call server. We had problems with one of our 7.5 installs because of this.

If you can't log in, though, I don't know how you can check or change that parameter.