Customer has mitel 3300 system without QSIG enabled. And we want to connect it to Nortel by DPNSS. Anybody can help to provide sample setting on Mitel or Nortel systems. Thanks in advance.
Remark
Mitel system is sx-2000. Upgrade is impossible.
This guide of mine for DPNSS "B" end! is very old and some of the prompts might have changed, but it still gives you a good idea on how to program it up for Option 11 systems
Does the SX2000 support Q931?.
DPNSS_B.TXT CONFIGURATION OF DPNSS ROUTE ** B END ** (OPTION 11 18.40H)
08/05/1996
>LD 17 ##### CONFIGURATION #####
REQ CHG
TYPE CFN
ADAN
PWD2
PARM YES ------------------------- CHANGE PARAMETERS
LPIB
HPIB
500B
DTIB
DTOB 35 -------------------------- DIGITAL TRUNK O/P BUFFERS
NCR
NDIS
PCML
ALRM
ERRM
DTRB
ABCD
TMRK
FCDR
PCDR
MLDN
DUR5
MARP
CEQU YES ----------------- CHANGE COMMON EQUIPMENT CONFIGURATION
DDCS 6 ------------------------- CARD/LOOP No. FOR PRI CARD
TDS
CONF
DTDT
DLOP
PRI2
APVL
DTI2
MTYP
SMEM
OVLY
VAS
FRPT
MANU
CLID
MGCR
DCUS
MAGT
ATRN
MSCL
CFWS
REQ CHG
TYPE CFN
ADAN NEW DCH 12 ------------------ CONFIGURE D/CHANNEL
CDNO 6 ------------------ CARD No.
PORT 1 ------------------ PORT (ALWAYS 1 FOR PRI)
DES DPNSS ------------------ DESIGNATOR
DPNS YES ------------------ YES = DASS/DPNSS NO = Q931
ADAN DATA SAVED
ADAN ****
>LD 74 ##### DDSL #####
REQ NEW
TYPE DDSL
S2
DDSL 12 -------------------------- D/CHANNEL No.
SIGL DA -------------------------- SIGNALLING TYPE
DDCS 6 -------------------------- LOOP/CARD No.
PRIV YES ------------------------- NO = DASS YES = DPNSS
SIDE BNT ------------------------- AET = A END BNT = B END
CNTL YES ------------------------ CHANGE ALARM THRESHOLD SETTINGS
ALRM AIS 1 1 6 }
ALRM LOI 6 1 6 } ------------ ALARM THRESHILD SETTINGS TO CHANGE
ALRM DAI 1 1 6 }
ALRM
CNTR
Here are our RDB and DDSL set up for connections between CS1000E R7.5 to SX2000
We did find an issue where incoming calls from PSTN over DASS links delivered into the CS1K then, transferred via DSC to a busy extension on the sx2000, returned NU rather than busy tone and avaya supplied a patch MPLR32055 to update this software bug in the DPNSS gateway code on the CS1K.
REQ: prt
TYPE RDB
CUST 00
ROUT 1
DES SX2000
TKTP IDA
NPID_TBL_NUM 0
SIGL DPN
CNVT NO
RCLS EXT
VTRK NO
DTRK NO
INAC NO
SPN NO
DSEL VOD
CNDP UKWN
AUTO NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 1601
TARG
CLEN 1
BILN NO
INST
TIMR EOD 13952
RMA 20480
SRM 32640
RAS 13952
NRAG 30
VSS 0
VGD 6
DRNG NO
CDR YES
INC YES
LAST NO
TTA YES
ABAN YES
CDRB YES
QREC YES
OAL YES
AIA YES
OAN YES
OPD YES
NDP EXC 0
NATL YES
CFWR NO
IDOP NO
VRAT NO
MUS YES
MRT 50
PANS YES
RACD NO
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
OHQ NO
TTBL 0
PAGE 002
ACNI NO
PLEV 2
ALRM NO
ART 0
SGRP 0
ARDN NO
CTBL 0
AACR NO
DDSL 15
S2 0
SIGL DA
DDCS 052
PRIV YES
SIDE BNT
MWIF STD
L2_RST YES
SAT NO
ALRM TBF 05 (S) 00 (H) 01
FAE 02 (S) 01 (H) 04
HER 01 (M) 01 (H) 10
TSF 00 (S) 00 (H) 00
AIS 01 (M) 01 (H) 06
LOI 06 (S) 01 (H) 06
DAI 01 (M) 01 (H) 06
CNTR CRT 120
TMT 50
SCT 20
NMT 100
MPT 2048
OTH 5
LDT 32
DTH 5
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.