Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel to Cisco Unity VM

Status
Not open for further replies.

BkMesser

Technical User
May 15, 2006
203
US
I am seeing if anyone has made this work correctly.

I have 2 release 3 Opt. 11's. We will call them Site A and Site B.

Site A has a point to point PRI t-1 to Site B.
Site B has a QSIG t-1 to a Cisco Unity.

Voice mail answers correctly, but the lights at Site A only work once in about every 5 tries and a pri265 gets printed at Site B when the light does come on at Site A.

I have seen the bulliten about the NCDP and that looks right to me.

Will changing the point to point between the Opt. 11's to QSIG solve this? Or is there another Solution??

Thanks,

Brian
 
Without seeing your config between the 2 Nortel switches. I'm thinking that may solve your problem, changing the span between site A and B to QSIG. Here is your error.

PRI0265 Database Error: A Facility Reject message was received. Destination digits
cannot be translated. Output data: DCH: x DATA: a b c d e.
Where: x = D-channel number
a = TCAP package type
b = Problem (NOXLAN/NONMS)
c = Originating digits d = Destination digits e = Customer number
Action: Verify numbering plan databases are consistent between the near and
far end switches.
Severity: Critical. Critical to Monitor: Yes. SNMP trap: Yes
 
Thanks for the quick response. I will update this Friday.
 
Hi All....

Sorry for the delay in this update. Changing the t-1's between site a and b to qsig solved this problem and got rid of the pri265 errors.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top