Nortel to Cisco Unity VM

[BkMesser]

I am seeing if anyone has made this work correctly.

I have 2 release 3 Opt. 11's. We will call them Site A and Site B.

Site A has a point to point PRI t-1 to Site B.
Site B has a QSIG t-1 to a Cisco Unity.

Voice mail answers correctly, but the lights at Site A only work once in about every 5 tries and a pri265 gets printed at Site B when the light does come on at Site A.

I have seen the bulliten about the NCDP and that looks right to me.

Will changing the point to point between the Opt. 11's to QSIG solve this? Or is there another Solution??

Thanks,

Brian

 

[KCFLHRC]

Without seeing your config between the 2 Nortel switches. I'm thinking that may solve your problem, changing the span between site A and B to QSIG. Here is your error.

PRI0265 Database Error: A Facility Reject message was received. Destination digits
cannot be translated. Output data: DCH: x DATA: a b c d e.
Where: x = D-channel number
a = TCAP package type
b = Problem (NOXLAN/NONMS)
c = Originating digits d = Destination digits e = Customer number
Action: Verify numbering plan databases are consistent between the near and
far end switches.
Severity: Critical. Critical to Monitor: Yes. SNMP trap: Yes

 

[BkMesser]

Thanks for the quick response. I will update this Friday.

 

[BkMesser]

Hi All....

Sorry for the delay in this update. Changing the t-1's between site a and b to qsig solved this problem and got rid of the pri265 errors.