Nortel-Rockwell PBX internetworking

[ARouby]

Am asking if anyone knows what is the appropiate signaling protocaol to link a Nortel 81C with Rockwell PBX eliminating tromboning in case of transfer back calls from one PBX to another?

Thanks

 

[johnpoole]

are both switches capable of qsig.. that by far in the cleanest and it will anti-trombone.. check this out, on my qsig if i call the remote switch, i never hit a trunk if that call is cfa back to mail.. the far end rings via the d, and the called party does not answer, a trunk never goes busy and the mail answers back on the main site.. that's one better then the old anti-trmb on non pri

john poole
bellsouth business
columbia,sc

 

[ARouby]

Thanks alot i will try it.

 

[ARouby]

Please can anyone send to me the needed configuration for QSIG link (Loop/DCH/Route)eliminating the tromboning?

 

[johnpoole]

here's a copy that works

http://www.tek-tips.com/viewthread.cfm?qid=1017219

and trmb does work with this one

john poole
bellsouth business
columbia,sc