Nortel ringing groups

[DeanPeterson]

I'm using Nortel 7.1 software on a MICS. I want an extension to ring differently on one CO line verses another CO that appears on the same phone. Is this possible?

 

[allworxguy]

Yes under LINES change the ring type.

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[DeanPeterson]

Thanks Marv for responding:

I cant find that? I want the same phone to ring differently on its first line that it does on its 4th line appearance.

 

[curlycord]

Hi Dean

Please keep all questions here on the forums and not emails directly to us, thanks.

Marv is right, you need to look for Distinctive Ring under Lines
Ring type choices are 1 to 4.



________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[DeanPeterson]

Sorry I cant find anything under lines about distinctive ringing. All I know is feature 6 and that changes every line on the phone also. I need two distinctive rings at each phone. Thanks for the good help

 

[DeanPeterson]

Sorry ignore previous posts. I found it under lines. I was using older software and not 7.1. thanks

 

[curlycord]

Dean you entered an invalid return email address on my site, try again.
Thanks

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca