Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel phone wrong date

Status
Not open for further replies.

sgorges

Technical User
Jul 24, 2007
73
I have a 81c w/ 5.5 s/w

I have phones coming up with a time/date of
"Sept 63 15:30 pm"

I am not setup for 24hr clock nor is there 63 days in the month (I think)

Anyone ever have this issue

Here is the firmware on all M3903 phones


****M3900 VERSION REPORT****
TERMINAL TYPE = 019
CORE FIRMWARE VERSION = 017
FLASH FIRMWARE VERSION = 089
 
If it's only one phone, I would strongly suspect a bad phone.
 
Did you try an IDU on the phone TN to see what prints out - if it is not a normal station ID printout then yes, I would suspect a bad phone like allenmac.
 
reload the firmware if it's just a single set

john poole
bellsouth business
columbia,sc
 
I am waiting for it to happen again to see how many phones are affected. It happens a couple times a week and corrects itself after some time.

You can still use the phone as if it was normal
 
then go to ld 88 and turn on lamp audit.. it was on by default prior to rls 3.. the 3000 series does a time sync to the core during audit. you should be able to disu the set, enable and push the time correction

john poole
bellsouth business
columbia,sc
 
What is the sequence in ld 88
I just looked thru ld 88 in the manual and saw nothing about lamp audit

Thanks
 
I say just unplug the phone and plug it back in.

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top