We moved and reinstalled Nortel phone system but voice sound was too low. We changed phone and line and also rebooting several times. Still problem. One tech guy checked our phone system. He recommend to replace Trunk Cartridge NT7B75GE-93. Please let me know if this recommendation make sense to improve voice sound. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel Phone System 4 x 16 NT7B58AAAN with Trunk Cartridge NT7B75GE-93
- Thread starter FelixKS
- Start date
curlycord
Programmer
You have a Norstar CICS (Compact ICS)
I can say that it is a "Global" card and it did help resolve volume issues when conferencing.
Did the tech test the line with the test set before the phone system to see if it had good volume?
Maybe changing the LossPkg programming might help...
Loss Package allows you to select the appropriate loss/gain and impedance
settings for each line. The setting is based on the distance between the ICS
and the terminating switch, and the terminating switch type.
The following table shows the available settings.
"See the CICS Installer Guide to view the table as chart cannot be pasted here"
A loss of 4 dB corresponds to a cable length of approx. 2700 m (9000 ft.).
Press CHANGE to select the setting: MediumCO, ShortCO, LongCO, ShortPBX or LongPBX.
Also make sure the volume in system programming is set to "Set Volume" and not "System Volume"
"Set Volume" remembers your own last volume setting so you do not have to keep turning volume up or down every call.
Outta Ammo!
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
I can say that it is a "Global" card and it did help resolve volume issues when conferencing.
Did the tech test the line with the test set before the phone system to see if it had good volume?
Maybe changing the LossPkg programming might help...
Loss Package allows you to select the appropriate loss/gain and impedance
settings for each line. The setting is based on the distance between the ICS
and the terminating switch, and the terminating switch type.
The following table shows the available settings.
"See the CICS Installer Guide to view the table as chart cannot be pasted here"
A loss of 4 dB corresponds to a cable length of approx. 2700 m (9000 ft.).
Press CHANGE to select the setting: MediumCO, ShortCO, LongCO, ShortPBX or LongPBX.
Also make sure the volume in system programming is set to "Set Volume" and not "System Volume"
"Set Volume" remembers your own last volume setting so you do not have to keep turning volume up or down every call.
Outta Ammo!
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question