Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel Option 61C

Status
Not open for further replies.

ajaxx

Technical User
Jan 14, 2009
48
US
On a Nortel Option 61C is the default for a analog phone to dial from a speed dial list #73 and where do you find that at.
 
if you mean how to print your sytem speed dials

Ld 20

REQ : PRT
TYPE : SCL To print System or personal lists
LSNO C/R
SIZE C/R
RANGE xx yy You can print out a range of store numbers. or C/R
STOR 0 901785762300
STOR 1 90800500005
STOR 2 2273
 
Not the speed dial list but the spre code.
 
So if FFC data does not exist, does it need to be added for analog phones to use speed dial?
 
yes... do u not have any codes programmed at all ????
 
When I do a print in ld 57 of FFC I get SCH8896 which says FFC data does not exist.
 
It says spre 1999. Is that what they have to dial for a speed dial?
 
i think you do not have any buils... so go ahead and build some in LD57

LD 57
req NEW
type FFC


maybe a good idea to have a read of the book first...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top