Jul 21, 2011 #1 ajaxx Technical User Jan 14, 2009 48 US Site cannot dial area code 432 would that be blocked in the pbx and if so what is the LD to check. Thanks.
Site cannot dial area code 432 would that be blocked in the pbx and if so what is the LD to check. Thanks.
Jul 21, 2011 #2 bhassell2000 Technical User Jul 28, 2009 1,658 US see if the NPA 432 or 1432 is programmed in LD 90 Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell Upvote 0 Downvote
see if the NPA 432 or 1432 is programmed in LD 90 Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell
Jul 21, 2011 Thread starter #3 ajaxx Technical User Jan 14, 2009 48 US To add a area code do you just do a change in ld 90 and add the area code? Upvote 0 Downvote
Jul 21, 2011 #4 RickyPone Technical User Apr 22, 2011 509 US No to add it you have to use new at req. Upvote 0 Downvote
Jul 21, 2011 Thread starter #5 ajaxx Technical User Jan 14, 2009 48 US Thanks that is what I thought. appreciate the help. Upvote 0 Downvote
Jul 21, 2011 #6 PRI265 Technical User Jun 9, 2011 23 US First I would print out an existing NPA in order to get the common RLI setting. (The TRAN is usually "AC1" but could be different in larger systems): >LD 90 ESN000 REQ PRT CUST 0 FEAT NET TRAN AC1 TYPE NPA NPA 1202 NPA 1202 RLI 3 DENY 976 SDRR DENY CODES = 1 ITEI NONE MEM AVAIL: (U/P): 10099580 USED U P: 2747075 358848 TOT: 13205503 DISK SPACE NEEDED: 607 KBYTES 2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO) REQ Then I would add the missing NPA, being sure to also deny 976 dialing within that new NPA: REQ NEW CUST 0 FEAT NET TRAN AC1 TYPE NPA NPA 1432 RLI 3 SDRR DENY DENY 976 DENY SDRR ITEI NPA MEM AVAIL: (U/P): 10099572 USED U P: 2747075 358856 TOT: 13205503 DISK SPACE NEEDED: 607 KBYTES 2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO) REQ Upvote 0 Downvote
First I would print out an existing NPA in order to get the common RLI setting. (The TRAN is usually "AC1" but could be different in larger systems): >LD 90 ESN000 REQ PRT CUST 0 FEAT NET TRAN AC1 TYPE NPA NPA 1202 NPA 1202 RLI 3 DENY 976 SDRR DENY CODES = 1 ITEI NONE MEM AVAIL: (U/P): 10099580 USED U P: 2747075 358848 TOT: 13205503 DISK SPACE NEEDED: 607 KBYTES 2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO) REQ Then I would add the missing NPA, being sure to also deny 976 dialing within that new NPA: REQ NEW CUST 0 FEAT NET TRAN AC1 TYPE NPA NPA 1432 RLI 3 SDRR DENY DENY 976 DENY SDRR ITEI NPA MEM AVAIL: (U/P): 10099572 USED U P: 2747075 358856 TOT: 13205503 DISK SPACE NEEDED: 607 KBYTES 2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO) REQ