You would do that under the SDRR prompt in ld 90
NPA 1210
NPA 1210
RLI 3
DENY 976
SDRR DENY CODES = 1
ITEI NONE
So I am set to allow people to dial 12105551212, if they have that access level, but I deny all 976, 1210976XXXX.
To program this you would:
MEM AVAIL: (U/P): 2712472 USED U P: 324046 76441 TOT: 3112959
DISK RECS AVAIL: 1280
REQ chg <- You type this
CUST 0<- You type this
FEAT net<- You type this
TRAN ac1<- You type this
TYPE npa<- You type this
NPA 1210<- You type this
RLI <- just hit enter it pre-existing programming
SDRR deny<- You type this
DENY 976<- You type this
DENY<- just hit enter it pre-existing programming
SDRR<- just hit enter it pre-existing programming, or input another string you want to deny.
ITEI<- just hit enter it pre-existing programming
NPA<- just hit enter it pre-existing programming
This of course is for the US and Canada. Print out your routing and paste here as you may use SPN's instead of NPA/NXX entries, but it would be the same programming to deny access to specified numbers.
John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile