Nortel Option 11 DENY lists

[nickkendall]

Hi all,

I'm trying to find out how to stop people calling premium rate numbers (090, etc). Is it possible to create a system wide deny list which included the start of the numbers for example?

Many thanks for any help.

Nick

 

[janaya]

You would do that under the SDRR prompt in ld 90

NPA 1210

NPA 1210
RLI 3
DENY 976

SDRR DENY CODES = 1
ITEI NONE

So I am set to allow people to dial 12105551212, if they have that access level, but I deny all 976, 1210976XXXX.

To program this you would:


MEM AVAIL: (U/P): 2712472 USED U P: 324046 76441 TOT: 3112959
DISK RECS AVAIL: 1280
REQ chg <- You type this
CUST 0<- You type this
FEAT net<- You type this
TRAN ac1<- You type this
TYPE npa<- You type this


NPA 1210<- You type this

RLI <- just hit enter it pre-existing programming
SDRR deny<- You type this
DENY 976<- You type this
DENY<- just hit enter it pre-existing programming
SDRR<- just hit enter it pre-existing programming, or input another string you want to deny.
ITEI<- just hit enter it pre-existing programming
NPA<- just hit enter it pre-existing programming


This of course is for the US and Canada. Print out your routing and paste here as you may use SPN's instead of NPA/NXX entries, but it would be the same programming to deny access to specified numbers.



John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[KCFLHRC]

What is 090 ?

 

[Firebird Scrambler]

09 is the start of the UK premium rate number range in the UK and it's found under SPN's in LD 90.
Look in this area to add in any DENY codes.

I'd print them all off first as you might have SPN's 09 or 090, 091 etc.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[nickkendall]

Hi all, thanks for the responses.

Firebirdscrambler - I've managed to print the current SPN's but can't see where the DENY codes are set. Do i set a new SPN for 09x? Where does the DENY bit go?

Thanks

 

[Firebird Scrambler]

It's best to contact me off line via the link below. Generally speaking, you should have an SPN of 09 or 090 etc. You won't see the DENY entries unless there they are already present against a number listed.

I've done you an example below on what you could try to enter in a DENY code.

>LD 90
REQ PRT
CUST 0
FEAT NET
TRAN AC1
TYPE SPN
SPN 09

SPN 09
FLEN 10
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

REQ CHG
CUST 0
FEAT NET
TRAN AC1
TYPE SPN

SPN 09
FLEN 11
ITOH
RLI
SDRR DENY
DENY 012345678
DENY
SDRR
ITEI
SPN

REQ PRT
CUST 0
FEAT NET
TRAN AC1
TYPE SPN
SPN 09

SPN 09
FLEN 11
ITOH NO
RLI 1
DENY 012345678

SDRR DENY CODES = 1
ITEI NONE

REQ

This means a DENY code of 09012345678 has been added. To remove any DENY codes, follow the example below.

REQ chg
CUST 0
FEAT net
TRAN ac1
TYPE spn

SPN 09
FLEN
ITOH
RLI
SDRR deny
DENY x012345678
DENY
SDRR
ITEI

SPN

REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE spn

SPN 09

SPN 09
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

REQ


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[nickkendall]

Ok, so we don't have any 090 SPN's currently setup. It sounds like the above would work for specific numbers but I'd like to block any user from calling any number starting with 090.
Is that possible?
Thank you

 

[janaya]

Please provide an example of a number, and how it is dialed from the site and we can show you what needs to be done to block that number.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[nickkendall]

Hi, we dial 9 to get an outside line and then i want to block all numbers starting with 090. So it'll be 9090xxxxxxxx.

 

[janaya]

ok, if you dial 9+090 and you don't have 090 built in LD 90, they shouldn't be getting out of the system.

Please print out the following:

LD 20

REQ: PRT
TYPE: DNB
DN: 9

And paste that here. If 9 is an ACOD on your outgoing route, you may have to build your BARS/NARS tables to get this blocked. Not difficult, but a little tedious.

What you would want to see is 9 is the AC1 or AC2.

Go to:

LD 86

REQ: PRT
Type: ESN

Look for AC1/AC2 and see what is in there.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[nickkendall]

Yes, here are the results -

DN 9
TYPE NARS
NTBL AC1

LD 86 results -

AC1 9

 

[Firebird Scrambler]

Go into LD 90 and print off the SPN's. Follow my example above, but press enter where you see SPN to print off all of them and post it here.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[nickkendall]

Sure, here you go -
SPN

SPN 0
FLEN 1
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 07721
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07741
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07767
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07768
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07770
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07771
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07774
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07775
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07778
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07785
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07787
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07790
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07798
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07831
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 07836
FLEN 11
ITOH NO
RLI 1
SDRR NONE
ITEI NONE

SPN 1
FLEN 3
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 2
FLEN 6
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 3
FLEN 6
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 4
FLEN 6
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 5
FLEN 6
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 6
FLEN 6
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 7
FLEN 6
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 8
FLEN 6
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

SPN 9
FLEN 3
ITOH NO
RLI 0
SDRR NONE
ITEI NONE

 

[Firebird Scrambler]

Your SPN's aren't standard UK ones as your initial one of "0" is being used to route all "0" codes out of the system.
All you need to do is to create a new SPN of "09" in LD 90.

>LD 90
REQ NEW
CUST 0
FEAT net
TRAN AC1
TYPE SPN

SPN 09
FLEN 11
ITOH
RLI 0
SDRR DENY
DENY 012345678 (Up to 9 digits max needed, but remember that "09" has already been entered!)
DENY
SDRR
ITEI

SPN

REQ PRT
CUST 0
FEAT net
TRAN AC1
TYPE SPN

SPN 09


For any other area codes succh as UK 01,02 numbers etc, just add in a new SPN of 01 or 02 etc with a flen of 11 as there shouldn't be any codes greater than 11 digits.


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[nickkendall]

Great, thanks. I'll do this now and will test once i have an 090 number to test with. Thanks