nortel name on 3904's

[cuprajohn]

after having a new fibre remote installed on an option 81 rev 25.4 all the 3904' on site now have "NORTEL" on the screen.
i am unsure what overlay is used to remove /change this

thanks

john

 

[Avaya911PLM]

Check the IDLE SET DISPLAY in LD 17.

--
Fletch

http://PBXTech.Net

 

[Supernn]

you should have the "pwd2" though to modify this

 

[cuprajohn]

thanks a lot

 

[jimboire]

Hi,
you will need brand set at 2 in the ISm parm on the system see Keycode sheet.
or
LD 22
prt
ism

With Brand set at 2 Nortel can be changed to what ever you want, this is done in CDB as our freind above says LD 17

good luck
H Ireland

 

[lemonheads]

Hi,

You have to remove the value on the Idle_Set_Display parameter ON LD 22 ...