NORTEL MICS 5.0 TO 6.1 UPGRADE

[tightjibbs]

HELLO EVERYONE....
I HAVE A CUSTOMER WITH A NORTEL MICS 5.0.
THEY HAVE SEVERAL T24 ADJUNCTS BUT THEY ONLY WORK AT 6.1+ LEVEL.

I PURCHASED A 6.1 LICENSE. CAN I SIMPLY POWER DOWN, SWAP LICENSE CARD, & REBOOT?
I AM HAVING ISSUES GETTING/FINDING A STRAIGHT YES OR NO ANSWER.
-SETS ARE M7310, M7324, T7316, T7316E
-ANALOG TRUCK SERVICE (NO PRI)
-3 DIGITAL STATION 0X16
-CALL PILOT 150

THANKS,
DOUG.

 

[allworxguy]

What is the software level of the Call Pilot?

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[exsmogger]

Your CallPilot needs to be R3.0 or higher to be compatible with MICS R6.1. If so, you are good to go. Just power off and swap software.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[cook1082]

You don't need a licence just the s/w.

 

[tightjibbs]

Hello..
Thanks for the Info.
The call pilot is a 3.1.

Going to do the upgrade this Friday.
Thanks.