Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel Distinctive Ring / Auto Attendant Question

Status
Not open for further replies.

varrius

Technical User
Sep 27, 2006
19
US
MICS 7.0 w/Callpilot 100 - 2 Hunt groups of 5 lines each. Each hunt group has a prime. I programmed and just started using the A.A. and everything is going well except the ringing. Incoming calls need 2 rings for Caller ID. So the prime sets ring twice. I have used distinctive ring to change the incoming call ring but it is similar to the A.A. transfer to the sets. I have 2 questions, can I shut off the ring noise on the incoming lines to the A.A but keep the ring for A.A. transfers and Intercom? Where is the distinctive ring for A.A. transfers controlled from?

Thanks in advance for any help,

Varrius
 
Appr Only on the prime sets was what I needed. Thanks for pointing me in the right direction, curlycord.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top