Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

nortel cics programming issues

Status
Not open for further replies.

bxcbst

Technical User
Feb 1, 2008
7
US
nortel cics with 4.0 software seem to be losing programming on my ext I have programmed for the ata the line I a using for the ata to dial out on is changing from line 4 to prime line any suggestions?
 
I would suggest find out what the extension the ATA is give it prime to intercom, for that extension make sure the ATA as access to the pool that other extensions are useing such as when you dial 9 that way the ATA will be able to grab a spare line that is available on the system.
 
I do not wont it in a line pool this is line 4 in the system and is being used as a credit card and fax line so the line assigned needs to be line 4.
 
changing from line 4 to prime line any suggestions?"

does not make sense since the Pirme Line is what ever you make it, so make the Prime Line as Line 4.

Take line 4 out of pool
ATA DN/Prime Line = Line 4
Try Capabilities/Hotline/External and put a pause (F78) and see if that works.





=----(((((((((()----=
curlycord
 
I had this happen on some older cics and ata would prime to pool but would not pick up pool had to dial 9 first, replace same extension used for ata with a digital phone and prime would work to pool as soon as I went off hook.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top