NORTEL CICS DISA

[chay1]

Hi All

I've got the CICS system answering a DISA call and playing the stuttered dial tone, but for the life of me I can't get it to accept any password.

I've set under Passwds > Cos Paswds > 01 > Pswd 01: 123456 | User flter: None | Line Fltr: None | Remote Pkg 01: |
Also under System Programming > Access CIOdes > DISA #: 100

What do I need to enter at the stuttered tone? I've tried 123456, 100, 100 123456, all fail.

Thanks

 

[chay1]

I think i'm getting closer.

I hear the stuttered dial tone, enter my code, and then get a solid tone (resumably internal dialtone). but if I enter a local extension no eg. 221. I get a long wait of silence followed by fast busy.
Am I missing a step here?

Thanks

 

[Nortel4Ever]

What is the Rec'd Digit length sent to?

 

[chay1]

Rec'd length is set to 3

 

[curlycord]

Try going into a Target Lines...
Example (depending on software level) Target Line 049 or 061 with the received digits being 221 and Ring Only.
If it works then add all the other Target's/DN's.

If still an issue you should post all the things you did, otherwise how do we know what you missed?
You did not mention if the route is via direct line or via AA etc.

Tip - name the Target with the DN (or recd digits for normal applications) which helps big time when finding the Target line later.


________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[chay1]

Unfortunately could never get the DISA working. I ended up buying a SIP ATA with FXO port and connecting it to a VOIP and the other end to the SLT port on the NT. A long way around but it allows me direct DISA access (with PIN access controlled via the VOIP system)