Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel BPS 2000 running config

Status
Not open for further replies.
samir1976

samir1976

Technical User
Dec 22, 2008
3
CA
How to see running config in Nortel BPS 2000 running Firmware 3.0.0.5 & 3.0.3.0 ?
 
Sort by date Sort by votes
Go to "command line interface"
> enable
# show running-config
 
Upvote 0 Downvote
Show running-config command is not there in this particular
ios version.

 
Upvote 0 Downvote
The only other way would be to do an ASCII download of the config file and open it in a text reader, or upgrade to 3.1 sw
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AShammah
  • Locked
  • Question
Nortel/Spectralink 2211/2210 lasted firmware
Replies
0
Views
215
AShammah
AShammah
BSmith01
  • Locked
  • Question
Nortel Opt61C Meridian Mail Issue..
Replies
2
Views
109
ipohead
ipohead
VRRyan
  • Locked
  • Question
Nortel 5520-48T-PWR Console Issues
Replies
0
Views
145
VRRyan
VRRyan
Wayne VanTassell
  • Locked
  • Question
Nortel to Cisco
Replies
0
Views
83
Wayne VanTassell
Wayne VanTassell
sidisofi
  • Locked
  • Question
2 Avaya CS1000 failed to register one another across Cisco IP network running OSPF
Replies
0
Views
81
sidisofi
sidisofi

Part and Inventory Search

Sponsor

Back
Top