Nortel BayStack Router Assistance - NAT

[kofc3]

Hi All,

I am in need of a little assistance. We have an old BayStack ARN router that was present when I started my current position. It apparently has been here for some number of years and has kept on trucking in its original configuration. However, I now need to make changes to it. I have the commands to add a static 1 to 1 NAT mapping. But, I need to remove an old static NAT mapping. Has anyone on here done this before? ANd, if so could you kindly share an example of what BCC command I need to issue to remove the static mapping.

Thanks in advance for any assistance you can provide.

 

[biv343]

BCC, there's a term I haven't heard in a while. It would be a lot easier to do via Site Manager if you have a copy of that kicking around.

 

[kofc3]

Unfortunately, I do not have a copy. That would ne nice to have for sure. Do you know where I can get one? Or, are you familiar with commands? From the command line, I can drill all the way into the specific mapping. I just need to know the command to remove it. Thanks

 

[biv343]

I forgot most everything I ever knew about BCC.

Try this link for SM:

https://www.yousendit.com/download/M3Brb253dWNJMHVybHNUQw

 

[andy88]

You just need to enter "delete <BCC instance id>