Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel ATA2 Device Problem

Status
Not open for further replies.

danchung85

IS-IT--Management
Jan 24, 2012
25
US
Hi I have a nortel MICS 6.1 system using SIP trunking via a SPA8000-G1 voice gateway.

About a month ago a connected an ATA device to add cordless telephone system to the system, and it worked fine. (Panasonic brand).

However, after purchasing and connecting a Nortel ATA2 device, I cannot get it to work at all.

Is there a special secret way to install this? or are my (2 ATA2 devices) dead? (I bought one, had one sent as a replacement for defective..)

Any tips and pointers would be appreciated. I find it strange that TWO ATA2 devices would be defective back to back. Thank you very much!
 
I've been using the extension (113) with a digital line till the ata device came in. I went into the system and set the ATA settings to 'telephone' and i think thats it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top