Nortel An Router connection to internet

[milky88]

I was wondering if anybody can help me with information on programming a Nortel AN router with software ver. 10.2. I need to connect to an ISP through a T-1 connection using a Kentrox CSU/DSU. The ISP gave me the router ip address and their router address. Any information would be helpful or if there is a place to find sample AN router configuration templates for internet connection. Even if I could download a configuration locally on site manager to view it.

Thanks

Mike

 

[mbhandari]

Hi,
Use site manager to configure the link. What Kind of encapsulation is at the ISP side? is it PPP or HDLC or Frame-relay whatever. Just Check with the ISP.
-bhandari

 

[khaleel123]

can I configure secondary ip on ethernet port similar to that of cisco..

 

[hahoang]

note that Baynetworks router does not support HDLC

 

[977128]

Hai,

I guees you have a site manager/console cable so that you can set the basic config first. I can sent you a doc on how to configure AN/ARN router using Site Manager.

Do advice if you still need it.

 

[jcmanuel]

I have a somewhat similar problem, please help...
We have a micom 5kt pro plugged in a baystack AN router that was working a few years back. When we moved to another building we dismantled it and had it in a shelf for over a year. We want to use it now for a leased line connection to the internet and the isp guys said they don't know how to set it up. I tried Nortel's website and came up with nothing. I tried calling them up and said they stopped tech support on Baystack and Micom. Anybody out there who can help me start configuring these two? How do I start? What do I need?

BTW, I did a reset on the both Bay and Micom...what's the default IP address or default config if any...I tried downlaoding the user's guide from archive.org but I don't know what cable to connect it with my laptop...I tried hyper terminal and it wouldn't connect...help!