Nortel 81C to Octel 250 tbl 2

[papagigo1]

I have an Octel 250 with three FLT boards. At times the ports on the 3rd FLT board won't answer up. I would like to know if the FLT board can be re-seated with the power still applied to the Octel or does this have to be done with the power off.

Thanks in advance,

Mike

 

[JShutter]

Hi Mike,

On the Octel 250 systems the FLT boards are hot pluggable.

Menu 13.11, Review Card Management, allows you to view card status when replacing existing FLT cards while the server is on line.



JShutter
TRI-STAR Telecommunications

http://www.tristartelecommunications.com

 

[letco250]

Hi,

I used Jshutter's advice to repair my octel with the hung ports. Took board out of service (menu 13-11), reseated board then brought it back up with 13-11. Ports answer up ok now. No power down or reboot of Octel was needed.

Thanks
AL

 

[papagigo1]

Jshutter,

Thanks a million..

Mike