Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel 3x8

Status
Not open for further replies.

NextProblem

Programmer
Jan 20, 2010
9
US
Ok folks, it's time to get into Professor Peabody's way back machine. I have a customer with a Nortel 3x8 (DR1 I think), when they are on a call connected to a device looking for DTMF they can press digits all day long but there is no response at the other end. Do I have the ability to change from short tones to long tones? And will this solve the issue?

Thanks


I only have time to do it right.
I don't have time to do it twice!
 
Feature 808 will give you tones as long as you hold the button down.

Wayne T
 
thanks to both, I'll make sure it is set to tones and follow up with 808 if I need to.

I only have time to do it right.
I don't have time to do it twice!
 
A 3x8 with DR1 will lose it's programming if the power goes out since it's likely a 20 yr old system (the capacitors that hold the memory are shot by this point). Have a few of these out there in my service territory that I get to deal with every now and then when the power blinks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top