I have an IP Office R8.1 and I can successfully program a Nortel/Avaya 1120E 1140E 1220 1230 etc. They come and work and I can factory default them also using the code and mac address. The 1150E is a bit of a challenge. It tries to connect to the switch but the system .prv reading fails at boot up.
This is where the phones upgrade software and take on new language files etc. I can see that the phones are taking on ip addresses and I have programmed the provisioning to be the address of the IP office which is 192.168.42.1 I put all of the programming in manually but it then asks me to enter a value of "1,6,7" I have no idea where it wants me to enter that. So I have put the phones back onto auto programming and they still won't boot up.
Does anyone know if these phones are compatible with what I'm using?
This is where the phones upgrade software and take on new language files etc. I can see that the phones are taking on ip addresses and I have programmed the provisioning to be the address of the IP office which is 192.168.42.1 I put all of the programming in manually but it then asks me to enter a value of "1,6,7" I have no idea where it wants me to enter that. So I have put the phones back onto auto programming and they still won't boot up.
Does anyone know if these phones are compatible with what I'm using?