Nortel 1050 + BSR222 Help =(

[mylox]

I have a 1050 at the office I just bought & a BSR222 at 3 remote sites I just bought. I got BSR2222 working to surf the net but I can not creat the tunnels to the office for some reason.

All remote sites are Dynamic IP's
Office has a static IP

I need to set up the VPN's so that the remote offices (i2004 phone) will connect and work. I'll pay if you want to deal with it or if not and you just want to give advice, I would greatly appreciate it.

 

[MagnaRGP]

in the 222 (single tunnel)

type is branch
Set up and apply multiple IP policies each with local range = local subnet and remote range = subnet at another site)
Authentication is PSK
Local ID type = DNS
Content = choose a name (example sitea)
Peer ID = IP
Content = static IP of 1050
MY IP address = 0.0.0.0
Secure gateway address = IP of 1050
For the encryption type, set up every type supported by your 1050.

in the 1050:

build 1 tunnel for each branch
type responder and filter = permit all
initiator id = content id from 222 (example sitea)
text psk = key chosen for 222
for the ip policy, set up local network as main site subnet and remote network will need to be all your branch offices on each tunnel

if you use stateful firewall you will need to enable tunnel to tunnel traffic (possibly individually).

This is will require tweaking as it's by memory. use the logs on both sites to see if and where there is any hangup in establishing the tunnels (usually in the encryption types), but it does work once you nail the config

 

[mylox]

at the remote site do I make a DMZ on the fios router to the BSR222?

 

[mylox]

This thing sucks i cant get it working can anyone recomend someone willing to config this thing. I don't mind paying. THanks!

 

[MagnaRGP]

What is the fios router? The 222 should be the edge router.

 

[mylox]

Thanks for the help Magna but I got to get this thing up and running and I guess I just don't have it in me to figure it out. Would you know anyone willing to do this? I can set up remote log in and we can talk on the phone about ip's etc. I would greatly appreciate it.

 

[mylox]

Can anyone recommend a nortel router config guy I can get a hold of? THanks in advance!