Norstar PRI to Local Telco

[WaltNC]

I have a PRI with DID service inbound. Is it possible to block some of the outgoing telephone numbers from being sent out when an outgoing call is placed? The majority of the people in the office are ok with their number being sent out but I have a couple of managers who want their number blocked.

 

[PERRYPJ]

LEAVE OLI BLANK

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[WaltNC]

Is this a prompt that is setup for each extension number?

 

[cook1082]

Yes. If it is blank the CO should send the main #.

 

[WaltNC]

Thanks to all that responded.

 

[jerryreeve]

If you don't have anything in the OLI block the telco will insert the Main Listed Number of the PRI

----------------------------
'Rule 29', "The enemy of my enemy is my enemy's enemy. No more. No less."
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com

 

[pccal]

There is a feature called ONN blocking (F819 I think).
When set up it works much like *67 call blocking.
I am not positive that this feature exists in Norstar but I think it is in the latest versions 4.1 & up.

 

[jerryreeve]

On a pri you shouldn't have to do any extra programming, the blocked info is passed over the D channel and the far end will get "private number" ad the CLID info.

----------------------------
'Rule 29', "The enemy of my enemy is my enemy's enemy. No more. No less."
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com

 

[tarheel25]

Thanks for all of the replies.