Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar Polycom

Status
Not open for further replies.

mass1954

Technical User
Apr 6, 2004
78
CA
Hi guys. Need to download a user guide for a Norstar Polycom asap...any help would be GREAT!!!
 
Hi all,

Problem with our conference phone.

I hooked up a Norstar Polycom Clarity phone to our MICS 6.1 8x32 system. When first powered, the lights on the speakerphone flash red in a sequential sequence. Then the speaker emits a chirp and the lights (power and the three speaker lights) flash green at once. Is the unit defective? Am I doing something wrong. I downloaded a users guide but it was of no help.

Thanks in advance for your help,

Stu
 
Plug a regular Norstar phone in to the jack you have the polycom pluged into. If the norstar phone works, your polycom probably is bad.
 
That is the bootup/POST sequence of a polycom ...
You must get a dialtone after that
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top