Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar MICS 7.1 door phone rings until answered

Status
Not open for further replies.

htroberts

MIS
Feb 2, 2010
8
US
I have a MICS v7.1 (30DEC12 NAT) with a Nortel door phone (BST?).

In admin, I've got call DN = 739, Rings: 5, Page zone: 3, Chime type: 1. Opener type=none.

739 is setup to ring the extensions I want it to, but when I hit the door phone button, the extensions in 739 keep ringing until it's answered--doesn't give up and go to the page zone after five rings.

In the hunt group, I've got member DNs, no lines assigned, mode: broadcast, if busy: busy tone, Q timeout: 60, Overflow 739, Name, Aux ringer: N, Dstnct ring: none.
 
Nortel door phone (BST?)."
Norstar Door phone is for Norstar systems only
BST Door phones are for BCM systems, however they maybe backwards compatible but somebody else may know/answer.
Next time on site get the NT number on the back.

-Make sure the Door phone and the phones are in the same page zone.
In other words you want Door Phone programming to page zone 3 (as you have) but you also want both the Door Phones DN and the Sets DN's to be in zone 3.

-"Page zone: 3" besides that, see if the Norstar door phone programming also as a choice of Page, Ring or Both, I know BCM has this option but I forget on Norstar Door Phones.


________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top