Norstar Manager 3.7 SQL errors

[freefone]

I am trying to connect via modem to the FASTRAD using Norstar Manger 3.7 but I get SQL error 105 everytime. I can't find the ERROR message file for the 3.7. Does anyone know what the 105 error means and how I can correct the problem.
Thanks.

 

[curlycord]

-105 No response timeout. RAD did not answer.
Common problems:
- If Remote Set RAD or FastRAD, check if power supply is connected.
- RAD TCM not connected.
- RAD Port is disabled, enable port via F**CONFIG or move TCM to enabled port.
Remote connection problems:
- Modem not responding to command. Incorrect modem init string.
- RAD not on Auto-answer. Try Operator assisted connection (Feature 9*0).
- RAD answered but is not responding.
- I-RAD answered on Compact ICS system. Use Remote Tools.
- DR2, DR3 and DR4 systems may not respond to Norstar Manager, try Remote Tools
- MICS2.0 systems require remote tools.
- Modem answering is not a RAD.
Direct connection problems:
- RAD not connected to Serial cable or wrong COM port specified.
- If Remote Set RAD or FastRAD, the RAD Local Baud Rate must match the direct connect rate of 9600bd.
- If Remote Set RAD, the RAD may have to reboot for up to a minute after Remote Set session.
- Only FastRAD can connect using 19200bd directly. The FastRAD default local baud rate is 9600, but can be set to 19200.

http://www.spoctel.com