Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar Callpilot 100/150 Loses Holiday Schedules after a Power Lost

Status
Not open for further replies.

NorstarOption

Technical User
Apr 4, 2002
592
US
I have a site that keeps losing holiday schedules after an outage. Is there a fix for this?
 
Maybe
What version is the software?
3.1 is the latest and did help some Holiday blues of sorts.

Are you backing up the system and restoring ok?


________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
I have to check what version they are on right now. I haven't done any backup on the callpilot 100/150 because I don't know how. I'm currently searching on how to access the callpilot 100 remotely and doing a backup. It's been awhile since I worked on this system back in Wiltel era =)
 
Here is the FAQ on how to network the Callpilot or just connect direct if onsite with a cross-over cable.

You need the BRU software (Backup & Restore Utility)
This was on the CD in the Utilities older if you have it.

You log into the Callpilot Browser then navigate to Backup & Restore and select backup, click proceed, it will then prepare the Callpilot for the backup.
Open the BRU software, enter the IP and select Backup.

Takes about 45 minutes I think....the status bar hangs for a long time when its about 3 quarter done.

Same process to Restore.


________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
This was a known software bug, but can't remember the software level, it was an earlier version though. If you upgrade to 3.1 that should fix you up.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top