Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar 7.1 Default DNs?

Status
Not open for further replies.

narsman

Technical User
Jun 16, 2010
69
US
Hope this hasn't been covered somewhere else, I looked but didn't find what I needed.

I am looking for a list of numbers that are assigned by default in a Norstar MICS 7.1.

Reason: I have assigned a destination code of "1A" (1.>) to PRI-Pool-A. When I view the destination code in programming I see 10:asssigned, 11:asssigned, 12: unavailable, 13:asssigned, 14:asssigned, 15:asssigned, 16:asssigned, 17:asssigned, 18:asssigned, 19:asssigned.

Notice the 12: is unavailable. I need to free this number up, but can't find where it is used in the system. When dialing "12" the phone responds with "Invalid Number"

Customer wants to not dial 9 to get outside line, just 1+ number. This currently works for all digit combinations, except those that start with 12. ie. 1(214)555-1212

A full list would be helpful, but I REALLY need to find the "12".

Thanks in advance.

Steve

I don't mind coming to work, but that eight hour wait to go home is a bitch.
 
Not aware of one, you need to look at the programming.

Off hand
1 for Park
2 for Station DN's
4 CICS for Hunt Groups
7 MICS for Hunt Groups
9 for External

Check your dialing Plan maybe.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
Check your ACOD's and DISA settings in case "12" is used. It's really a case of going though all the programming. If you are able to access the Norstar using NRU and the browser feature, then perhaps you will have a better chance of finding where "12" is being used.


Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Very advance high level knowledge on Linux BCM with keycode support
 
I found the issue.

It was a REC'D # that was programmed on a Target Line.

Thanks to those that responded, as always its great to be part of this community.


Steve

I don't mind coming to work, but that eight hour wait to go home is a bitch.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top