norstar 0x12 power led flashing module dead . anyone have a fix (component level)

[philthethrill]

i just tried to activate 2 12x0 fiber modules onto a mics
the power light flashes and module will not function
same fault with both modules
i would like to repair may be a power supply component
any suggestions
thank you

 

[exsmogger]

Is there a trunk card in the first (left) slot? Newer trunk modules act like this when they don't see a trunk card.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[philthethrill]

ok
mics 4.0
top slot of expansion card
if i put a card in left or right slot 12x0 pwr light will flash and not connect
if i put a card in left slot and one in right slot all ok
this is strange
have tried different cards

 

[exsmogger]

Weird. You might look in Hardware to see how that expansion port is configured. Maybe it's not configured for the correct type of module.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952