Non-Busy Extension for IP Phones 1

[IN10CT]

Is there any way to configure an IP Phone as a non-busy extension?

 

[kwbMitel]

On a SX-200 - Yes (COS Option)
On a 3300 - No (ANLOG Set assignment only)



*******************************************************
Consistancy... Is only a virtue when you're not a total screwup.

 

[MitelInMyBlood]

YES.
See the FAQ. Works the same with any superset, whether TDM or IP.

 

[MitelInMyBlood]

Here's the link

http://www.tek-tips.com/faqs.cfm?fid=5872

 

[IN10CT]

Only one question... what does MDF refer to in the FAQ?

 

[paterson]

MDF = Main Distribution Frame.

If you don't know what that is, well...

Okay I will tell you. Telecom is full of Acryonyms. An MDF is location of the physical cabling terminations in a building. Usually, this involves Entrance Cabling (how a telco gets into your building), Tie cabling to an IDF (Intermediate Distribution Frame), Station Cabling to desktops.

If you need to look up other terms:

http://www.telecomterms.com/

or

http://techdictionary.com/

or

http://www.atis.org/tg2k/

**************************************
Insert Witty Signature Here.

 

[kwbMitel]

Awesome!!!!

I've used stn/trk loopback for numerous other applications such as remote ACD monitoring and call park pickup via DISA but this never occured to me.

Well Done.

*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.